select <NAV TARGET>


select target object; either NAV target, airport or runway. 'select EDDM 08l' would select runways 08l at Munich airport.Refer to the lessons for an automated ILS approach.


select approachentry


Selects the FSP-calculated approach entry point as the current NAV target. Sets the target altitude to the value (ft) above ground defined in fspilot.ini.  Assumes that you have used 'find bestrunway <ICAO>' first.


select bestrunway


Selects the calculated ILS runway as the current NAV target. Assumes that you have used 'find bestrunway <ICAO>' first.


select home_airport


selects the predefined hoe airport (see set home airport) as the current NAV target


select ilsentry


Selects a virtual GPS coordinate as the ILS (instrument landig system) entry point and as the current NAV target. Sets the target altitude to the value (ft) above ground defined in fspilot.ini. Further assumes that you have used 'find bestrunway <ICAO>' first.


Created with the Personal Edition of HelpNDoc: Easily create Qt Help files